|
The mounting and termination hardware required for the Blolite installation
system is adapted from conventional fiber cable distribution hardware.
Hardware products that meet the unique requirements of Blolite are available
from many sources. Products currently available from Hubbell Premise Wiring
and The Siemon Company have been successfully field–tested. These
complete Blolite systems are included under the ClearLight™ and LightSystemSM
warrantee programs respectively
A wall mount enclosure that provides a well managed
distribution point where sections of Microduct cable are joined or re-routed.
With multiple cable entry ports, this enclosure can accommodate complex
Microduct routings in a safe and secure environment.
This splice kit includes all materials required to
make a flexible, watertight, grounded joint between two sections of Microduct
in an outside plant environment.
A rack mounted enclosure fitted with special Blolite
adapter panels, which facilitates managing and patching Microduct in a
format similar to conventional fiber optic patch panels.
These empty adapter panels have 6 openings that are
designed to fit Blolite 5mm bulkhead connectors. Adapter panels are typically
specified to mate with hardware from specific vendors and may not be compatible
with all styles of interconnect boxes.
A wall mounted termination and distribution enclosure
that facilitates the transition of fiber from Microduct into a conventional
fiber patch panel. In typical installations, splitter kits are used to
facilitate the fiber transition from Microduct to individual connectors.
A rack mounted termination and distribution enclosure
that facilitates the transition of fiber from Microduct into a conventional
fiber patch panel. These enclosures are available for 19" and 23"
racks. In typical installations, splitter kits are used to facilitate
the fiber transition from Microduct to individual connectors.
These small open frames can be mounted in place of
splice trays in some styles of interconnect hardware. They provide an
additional transition point within an enclosure for Microduct-to-Microduct
patching.
Designed for fiber-to-the-desk (FTTD) terminations,
these compact termination boxes can accommodate Blolite fiber terminations
and copper cable terminations in a single housing.
This fiber termination accessory kit provides protective
tubing and strain relief to facilitate the fiber transition from the Microduct
into standard fiber connectors. Splitter kits are available in 4, 8 and
12 fiber configurations.
These special fitting kits are designed to secure Microduct
as it enters standard wall or rack mounted enclosures. Compression fittings
are sized to be compatible with the outer diameter of the Microduct and
with the inner diameter of the entry port in the enclosure.
|
